Your biggest customer pays in 45 days. Your biggest supplier wants to be paid in 15. That gap — thirty days of you financing somebody else's business — is the single most common way a profitable startup runs out of cash. I've watched it happen to founders with healthy margins and full order books.
Improving supplier payment terms isn't about squeezing vendors. It's about restructuring the timing of money so that the cash you already earn stays in the business long enough to be useful. Below is what actually works, in the order I'd do it.
Key takeaways
- Payment terms are a negotiation, not a fixed rule — most suppliers have more room than their invoice template suggests.
- Ask for terms tied to a concrete event (a product launch, a new contract), not "because we're a startup."
- Early-payment discounts are usually more expensive than they look once you annualize the rate.
- Net 30/60/90 and 30-60-90 are different things; confusing them weakens your ask.
- Your payment behavior is your credit history. Pay small suppliers on time even when cash is tight.
Why supplier payment terms decide your runway
Every day you hold an invoice before paying it is a day of interest-free working capital. That's the whole mechanism, and it's worth being blunt about the arithmetic: a supplier invoice of a few thousand euros paid 30 days later instead of immediately is, functionally, a short-term loan with no paperwork and no interest.
Here's the thing most early-stage founders miss. Your cash conversion cycle — the number of days between paying for inputs and collecting from customers — is what determines how much cash you need to raise, not your revenue. Stretch supplier terms and you shrink that cycle. Shrink it enough and a round you thought you needed becomes optional.
Terms are leverage you already have and aren't using
When I first started buying inventory for a small operation, I accepted whatever terms came printed at the bottom of the invoice. Net 15. No discussion. It didn't occur to me that the number was a default, not a decree. It took a supplier casually mentioning that another client was on net 60 for me to realize I'd been handing over free financing for months.
Suppliers set terms to protect their own cash flow, not because they've calculated what you can bear. Most of them will move if the ask is framed around their risk, not your convenience.
How do I ask my supplier to change payment terms?
Ask in writing, ask once, and give them a reason that reduces their risk. That's the whole method. The mistake is treating it as a favor or an apology. It's a commercial proposal, and suppliers evaluate it the way they evaluate any proposal — what's in it for them, and what could go wrong.
The sequence that works
- Check your payment history first. If you've paid late even once, fix that before asking for anything. A clean record of twelve consecutive on-time payments is the strongest argument you have.
- Propose a specific, dated change. "Would you consider net 45 instead of net 30 starting from our next order cycle" beats "could we discuss terms."
- Offer something in return. A larger committed order, a longer contract, a referral, or simply a standing order instead of ad-hoc purchasing.
- Ask for a trial period. Three months on new terms, reviewed afterward. Low risk for them, real relief for you.
- Get it in writing — an email confirmation is enough for most suppliers, but it needs to exist.
A short email you can adapt
Keep it under 150 words. Something like: you're increasing order volume over the next two quarters, you've paid on time since the account opened, and you'd like to move from net 30 to net 45 for a three-month trial, with a review at the end. Offer to sign a purchase commitment for the period. Close by asking whether that's workable or whether a different structure suits them better.
That last sentence matters. It hands them a way to say yes to something instead of no to everything, and in my experience it's the difference between a template rejection and an actual conversation.
What are 30-60-90 payment terms?
They are two different arrangements wearing the same numbers, and mixing them up in a negotiation makes you look like you don't know what you're asking for.
Net 30/60/90 means the whole invoice is due after 30, 60, or 90 days respectively — three alternative options, one of which applies. 30-60-90 usually means the invoice is split into installments: a third at 30 days, a third at 60, a third at 90. The second structure is a cash-flow ramp for the buyer and a stretching of receivables for the seller, so it's a harder sell.
| Structure | What it means | Best used when |
|---|---|---|
| Net 30 | Full payment 30 days after invoice date | Default starting point; standard in most sectors |
| Net 60 / Net 90 | Full payment after 60 or 90 days | Established relationship, larger volumes, supplier has margin |
| 30-60-90 installments | Third at 30, third at 60, third at 90 days | Large one-off orders where the supplier wants partial protection |
| 2/10 net 30 | Pay within 10 days for a discount, otherwise full at 30 | When you have spare cash and want the discount |
Use 30-60-90 as a ramp, not a starting demand
If you're moving a supplier from net 15 to net 45, don't jump. Ask for net 30 now, and net 45 in two quarters if volumes hold. A staged ask reads as planning. A demand for triple the terms reads as distress, and suppliers can smell distress.
The real cost of early payment discounts
A "2/10 net 30" offer sounds like free money. Two percent for paying ten days early? Take it. Except the annualized cost of not taking it is what you should be looking at, and it's usually steeper than any startup's cost of capital.
You're effectively borrowing money for 20 days at 2 percent. Stretch that across a year and you're looking at a rate in the high double digits. If your business can't earn that on the cash, take the discount. If cash is tight and you're already financing operations, paying early to capture it makes the squeeze worse, not better.
My rule: only chase early-payment discounts on invoices you were going to pay that week anyway. Otherwise, negotiate the base terms and leave the discount alone.
What's a best practice when processing vendor payments?
Pay on the due date, not before and not after. That sounds trivially obvious, but I've seen startups pay early out of anxiety and late out of disorganization, and both are expensive in different ways.
- Run payments on a fixed weekly cycle. Batch them, don't send them ad hoc. Fewer transfers, clearer forecasting.
- Match invoice to purchase order before approval. Two sets of eyes, one of them not the person who placed the order.
- Track every due date in one place. A spreadsheet works better than most founders expect.
- Never pay a supplier you can't verify. Bank detail change requests are a standard fraud vector — call the number you already have on file, not the one in the email.
- Keep small suppliers first in the queue when cash is short. A late payment to a large corporate is a line in a system. A late payment to a small supplier can be their month.
Pay the people who can hurt you
Real talk: if you have to choose who gets paid late, think about who can stop your operations tomorrow. A sole-trader supplier who's owed two months may simply stop delivering. That's a supply chain failure caused by a cash-flow decision, and it's entirely avoidable.
What are some effective ways to improve supplier performance?
Better terms and better performance are the same conversation. Suppliers prioritize the customers who are easy to work with — clear forecasts, prompt approvals, on-time payment, no last-minute change requests. Those customers get the stock when it's scarce.
What moves the needle, in order of impact:
- Share a rolling forecast. Even a rough three-month view lets a supplier plan production. Most buyers never do this.
- Reduce your change requests. Every amendment costs the supplier setup time, and they remember.
- Pay consistently on time. Reliability beats volume as a signal in most supplier relationships I've seen.
- Give feedback directly. A short, specific message about a late shipment does more than a scorecard nobody reads.
Notice that three of the four are about your behavior, not theirs. That's not a coincidence.
What to do when the answer is no
Sometimes the supplier genuinely can't extend terms — their own working capital is thin. Accept it and look elsewhere: a slightly higher unit price from a supplier offering net 60 can be cheaper overall than a lower price on net 15, once you account for the financing gap. Run the comparison on total cost of ownership, not the line-item price.
And keep the relationship intact. The supplier who says no to net 45 today may say yes next year, once your payment record and order volume have done the arguing for you.
Which brings up the part nobody puts in the guides: the goal isn't the longest possible terms. It's a supplier base that trusts you enough to flex when you actually need it. Terms you extracted by force evaporate the moment you have a bad quarter. Terms you negotiated with a track record behind them stick.